Error codes (Generations I and II): Difference between revisions

Jump to navigation Jump to search
Content added Content deleted
VisualWikitext
old->Bbbbbbbbba
(The IDs are misleading so removing. (i.e. in Crystal there is a printer status address that defines both the printer error and the status like transmitting))
Line 49: Line 49:
{| border="1"
{| border="1"
!Error number
!Error number
!Identifier
!Cause
!Cause
!Solution
!Solution
|-
|-
|01
|01
|00
|The batteries are empty.
|The batteries are empty.
|Insert new, working batteries into the hardware and then turn the power on.
|Insert new, working batteries into the hardware and then turn the power on.
|-
|-
|02
|02
|01
|The universal game link cable is not, or incorrectly connected to the printer.
|The universal game link cable is not, or incorrectly connected to the printer.
|The player should re-connect the link cable correctly.
|The player should re-connect the link cable correctly.
|-
|-
|03
|03
|02
|There is a paper jam.
|There is a paper jam.
|Carefully remove the Paper Jam (see the GameBoy printer manual for more information) [or see [http://www.gamefaqs.com/portable/gbadvance/file/916598/35200 this FAQ]]
|Carefully remove the Paper Jam (see the GameBoy printer manual for more information) [or see [http://www.gamefaqs.com/portable/gbadvance/file/916598/35200 this FAQ]]
|-
|-
|04
|04
|03
|The ambient printer temperature is too high or low for the printer to operate.
|The ambient printer temperature is too high or low for the printer to operate.
|Attempt printing again at an appropriate room temperature.
|Attempt printing again at an appropriate room temperature.
Retrieved from "https://glitchcity.wiki/wiki/Error_codes_(Generations_I_and_II)"