Guides:Coin Case ACE: Difference between revisions
Line 109: | Line 109: | ||
|} |
|} |
||
* |
* (only if f you haven't done so in previous parts), catch any pokémon and nickname it "MAILWRITER". '''Put it in the third party slot'''. We'll alter this pokémon's stat experience to redirect TM25 execution to the TM/HM pocket. |
||
* Ensure that you have everything set up for Coin Case ACE: |
* Ensure that you have everything set up for Coin Case ACE: |
Revision as of 17:37, 6 December 2023
This is a guide on how to execute and/or exploit a glitch. For a more technical overview of the glitch involved, see Coin Case glitch. |
This page serves as a repository for a Coin Case ACE setup for the English versions of Pokémon Gold & Silver. It is part of the TimoVM's Gen 2 ACE setups set of guides.
The preparation is best done during daytime in-game. If needed, you can change the in-game clock with the help of this tool.
Please make sure to fully read every step of the guide before executing them.
If you encounter any issues when going through this guide or would like to provide feedback, please contact TimoVM on the Glitch City Research Institute Discord.
Setting up initial ACE
When using the Coin Case while a Bellsprout/Machop's cry and specific newly loaded tiles are buffered in memory, the game will execute code in various places before finally ending up in the $FA98-$FA9B range, which is echo ram containing the stat exp data of party pokémon #3.
Using specific movement patterns in the Goldenrod Radio Tower, we can form a jump to $EEEE, which is echo ram for the second character of the last read mail. This gives us enough space to call the start of box names, then fix the side effects of using the Coin Case and return to normal game operation.
In practice, the initial Coin Case ACE setup will be created using the following general process:
- Obtain the Coin Case
- Give any pokémon a mail with specific content and set up a box name code
- Set up a specific movement pattern in the Goldenrod Radio Tower to be able to execute ACE
Step 1: Obtaining everything needed for the setup
- Catch any pokémon and nickname it "MAILWRITER".
- Go to Goldenrod City and obtain the Coin Case by picking it up in the Goldenrod Underground.
- After obtaining the Coin Case, go to the Game Corner.
- If you do not have any coins yet, simply buy 100 coins.
- If you already have coins stored in the coin case, make sure that the first digit of the total number of held coins equals "1".
- In the Goldenrod Dept. Store, buy a Flower Mail.
Step 2: How to execute ACE using the Coin Case
Now that we have the Coin Case, we'll need to set up everything needed to actually safely use it. Using a specific setup, we can force the Coin Case to execute code starting from the second character of the last read mail. From here, we need to ensure that we have the proper setup to execute box name codes.
- Prepare a mail to ensure that a box name code can be executed
- Prepare specific box names to run a simple test code.
Finishing the setup
- Arrange your party like the following:
- Any
- Any
- "MAILWRITER" nicknamed Pokémon
- Any
- Any
- Any
- Finally, give the "MAILWRITER" nicknamed pokémon a flower mail with the following content:
|
Note: there is nothing unique about the MAILWRITER pokémon that requires it to be in the 3rd party slot. Later parts of the setup will, however, write data to the MAILWRITER pokémon, so it's convenient to keep it in the third party slot for now.
Preparing a test box name code
Rename the first box name to the following name. This box name code will be replaced later and is solely intended to verify if the setup is working correctly. Their only function is to safely exit ACE and return the game to normal:
|
Step 3: Using Coin Case ACE
In order to use ACE, always perform the following steps:
- Make sure to set box 1 as the current active box.
- Go to the Goldenrod Radio Tower and take the stairs up to the second floor. Move to the spot indicated by the above screenshot on the left. Save the game while you're still standing on this spot and reset the game.
- After reloading, take the following steps until you reach the spot indicated by the above screenshot on the left:
- 3 steps rightwards
- 2 steps upwards
- 1 step leftwards
- Open the start menu, open the pokédex, then listen to the cry of Bellsprout.
- Go to the Pokémon menu and read the previously mentioned mail.
- Open the item bag, switch item pockets at least once, then use the Coin Case. This will execute ACE.
Make sure to test the setup by going through this process once. With the current box name setups, you can verify that the setup is working by checking the TM/HM pocket. The quantity of TM03 should now be 255. You can now continue to the next guide.
If the test code crashes, check the following:
- Did you correctly follow the previous steps?
- Is the current active box set to box 1?
- Make sure that the first digit of the total amount of coins is equal to "1". 100 is a good total for this setup.
- Is the box name code correctly entered?
- Is the content of the mail correct?
Anytime you wish to execute wrong pocket Coin Case ACE, you'll need to repeat the steps outlined at the beginning of this section. Always make sure the held mail was read before using the Coin Case and ensure that a valid box name code was prepared beforehand.
Setting up an ACE environment
While we now have a way to execute box name codes using ACE, the current setup has a few drawbacks:
- Executing ACE requires performing various specific steps, preventing us from using ACE whenever we want.
- Box name codes have a limited characterset, effectively meaning that it's difficult to set up more complicated ACE effects.
To resolve this issue, we're going to install the Mail Writer. This is a 50 byte program, installed as a series of TM quantities, that will allow us to quickly and efficiently write and execute any arbitrary code we want.
To do that, we're going to use a box name code to obtain 255 copies of all TMs, then sell them in specific quantities to write out a program. Alongside that, the box name code will also add a TM25 to the main item pocket. Using this TM25, outside of the TM/HM pocket, will allow us to execute the Mail Writer at any time as long as a specific pokémon is kept in the second party slot.
The mail writer itself will be installed in the TM/HM pocket through the following two step process:
- Execute a box code using Coin Case ACE that sets the quantities of all 50 TMs to x255, as well as placing a TM25 in the main item pocket. On top of that, it will modify the data of party pokémon #3 so that they allow TM25 to be safely used, as long as it is kept in the second party slot.
- Sell TMs in specific quantities so that the amount of TMs in the TM/HM pocket spell out a small mail writer program.
Step 4: Setting all TM quantities to x255
- Rename box names to form the following. Please mind the differences between uppercase X (), lowercase x () and multiplication symbol ().
|
- (only if f you haven't done so in previous parts), catch any pokémon and nickname it "MAILWRITER". Put it in the third party slot. We'll alter this pokémon's stat experience to redirect TM25 execution to the TM/HM pocket.
- Ensure that you have everything set up for Coin Case ACE:
- "MAILWRITER" nicknamed pokémon holding mail in party slot #3
- Read the correct mail beforehand
- Perform all steps necessary to execute Coin Case ACE
- Use the Coin Case once. If the code was executed successfully, switch to the TM/HM pocket. It should now contain every TM at a quantity of x255. The code will also overwrite the first item in the main item pocket to be a TM25.
Step 5: Selling TMs to form a program in the TM/HM pocket
Now that we have obtained x255 of every TM, we'll be selling specific amounts of these in order to form a program. This program differs slightly depending on the specific language you're using.
The image belows displays the intended final quantities of all TMs, while the table in the next section displays how many TMs of each kind you need to end up with, along with the amount of money you gain by selling them.
|
TM Quantities to sell
TM | Final Quantity | Sell value |
---|---|---|
TM01 DYNAMICPUNCH | x17 | 357000 |
TM02 HEADBUTT | x85 | 170000 |
TM03 CURSE | x221 | 51000 |
TM04 ROLLOUT | x213 | 42000 |
TM05 ROAR | x213 | 21000 |
TM06 TOXIC | x213 | 63000 |
TM07 ZAP CANNON | x33 | 222000 |
TM08 ROCK SMASH | x66 | 94500 |
TM09 PSYCH UP | x98 | 78500 |
TM10 HIDDEN POWER | x207 | 72000 |
TM11 SUNNY DAY | x225 | 30000 |
TM12 SWEET SCENT | x209 | 23000 |
TM13 SNORE | x42 | 106500 |
TM14 BLIZZARD | x254 | 1500 |
TM15 HYPER BEAM | x80 | 262500 |
TM16 ICY WIND | x56 | 298500 |
TM17 PROTECT | x251 | 6000 |
TM18 RAIN DANCE | x40 | 215000 |
TM19 GIGA DRAIN | x10 | 367500 |
TM20 ENDURE | x135 | 180000 |
TM21 FRUSTRATION | x134 | 60500 |
TM22 SOLARBEAM | x18 | 355500 |
TM23 IRON TAIL | x19 | 354000 |
TM24 DRAGONBREATH | x35 | 330000 |
TM25 THUNDER | x129 | 126000 |
TM26 EARTHQUAKE | x79 | 264000 |
TM27 RETURN | x18 | 118500 |
TM28 DIG | x24 | 231000 |
TM29 PSYCHIC | x239 | 16000 |
TM30 SHADOW BALL | x33 | 333000 |
TM31 MUD-SLAP | x1 | 381000 |
TM32 DOUBLE TEAM | x196 | 59000 |
TM33 ICE PUNCH | x77 | 267000 |
TM34 SWAGGER | x205 | 25000 |
TM35 SLEEP TALK | x239 | 8000 |
TM36 SLUDGE BOMB | x58 | 98000 |
TM37 SANDSTORM | x27 | 228000 |
TM38 FIRE BLAST | x205 | 50000 |
TM39 SWIFT | x144 | 111000 |
TM40 DEFENSE CURL | x55 | 100000 |
TM41 THUNDERPUNCH | x189 | 99000 |
TM42 DREAM EATER | x40 | 322500 |
TM43 DETECT | x217 | 19000 |
TM44 REST | x56 | 298500 |
TM45 ATTRACT | x240 | 22500 |
TM46 THIEF | x254 | 1500 |
TM47 STEEL WING | x08 | 370500 |
TM48 FIRE PUNCH | x200 | 82500 |
TM49 FURY CUTTER | x24 | 346500 |
TM50 NIGHTMARE | x242 | 13000 |
Running the newly written program
- It is recommended to save before continuing.
- Put the pokémon that was nicknamed "MAILWRITER" into the 2nd party slot.
- Use TM25. If everything went correctly, this will start the mail writer and open a screen asking you to input text for a mail.
- From now on, you can repeat this process at any time to start the mail writer.
Since we aren't planning on using the Coin Case anymore, the mail that was previously given to MAILWRITER can be removed. It is no longer relevant for the remainder of the setup.
If the game crashes, first recheck if all TM quantities are correct. If all quantities are correct, you may need to redo the setup for the "MAILWRITER" pokémon. This can be done using the box codes included a bit further below.
A note on the nicknamed pokémon: when running the box name code, we altered MAILWRITER's stat experience data to contain a redirect to the TM/HM pocket. You can safely deposit and withdraw it from the PC. Please note that this pokémon must never gain experience after this point, otherwise you'll need to reapply the setup.
Step 6: Using the mail writer
From now on, simply go through the necessary steps to use TM25 to start up the RAM writer.
The mail writer will open a screen that asks you to write the contents of a mail. This is where you'll need to enter mail codes. Once done, use the "END" option to finish the mail.
This will cause the mail writer to convert the newly written code into assembly. It will also print a checksum (sum of all written values) on the screen just to the right of the lower row. This can be used to verify if a code was entered correctly.
Due to a lack of available memory in the TM/HM pocket, it is not possible to quit the RAM writer without executing the newly written code. If you ever accidentally activate the mail writer and would like to quit, simply write a mail containing "Rh", then confirm and exit the RAM writer.
Assembly can easily be converted to mail codes using TimoVM's MailConverter. Simply paste the assembly of the code you wish to enter here, press "run" and the converter will automatically generate mail codes requiring the least amount of button presses to write.
Controls
Between entering mail codes, the mail writer will ask for user input.
- Press SELECT to open a new mail and continue writing data.
- Press START to immediately jump to and start executing the newly written program. Only use this when you've finished every mail.
- Press any other button to go back one byte at a time to correct errors. If the printed checksum doesn't match the expected checksum, press DOWN 16 times to retry the last mail. This will also overwrite the printed checksum with the value at the currently selected address, giving you a method to check how far back you're going.
Enter your mail code, then press "END". | It prints the checksum and waits for input. |
What to do with the Mail writer
The Mail writer allows you to easily write and execute arbitrary payloads. Aside from writing your own codes, we recommend the following:
- Mail codes: this page contains a collection of assembly for mail codes that can be used for a variety of common purposes such as fixing the side effects of the ACE setup, editing pokémon and items, etc..
- RAM writer: (recommended for more experienced users) this page contains the assembly for a large one-size-fits all program that allows you to edit any value in RAM with a user-friendly GUI. It will also fix the side effects of the ACE setup when you first run it.
Addendum: repairing the "MAILWRITER" pokémon
In case something happens with the "MAILWRITER" nicknamed pokémon that causes it to no longer function, you can repair the pokémon without having to reset TM quantities using the following procedure:
- Arrange the party as follows:
- Any
- Any
- "MAILWRITER" pokémon holding mail
- Any
- Any
- Any
- Enter the following language-specific box name. Please mind the differences between uppercase X (), lowercase x () and multiplication symbol ().
|
- Read the mail held by the "MAILWRITER" pokémon.
- Go to the Goldenrod Radio Tower and follow the correct steps to finish the setup.
- Use the Coin Case to execute the code. If the game crashes, doublecheck the box name code and ensure you've performed every step of the process correctly.
- If the code executes succesfully without crashing the game, the "MAILWRITER" nicknamed pokémon has now been repaired.
Appendix
Plain text transcripts of codes
Language | English |
---|---|
A A A A A A A A A A A A A A A A A A p 'v 7 ' ] . 9 'l 'l 'l p 'm z 2 | |
Test box name |
0 9 é A ♀ h 'd [SPACE] |
Setup box name |
Box 1: A p é 3 2 'v 9 5 Box 2: é 1 2 'v 'd é 6 2 Box 3: ? b é , 2 'v ♂ 5 Box 4: é 2 2 'v ? é 5 2 Box 5: ? E é 5 4 'v G 5 Box 6: é ♀ 2 é 7 4 0 9 Box 7: ♀ ♀ ♀ ♀ ♀ 's ♀ ♀ Box 8: ? 'm é 6 4 'v 4 5 Box 9: é y ♀ 'v - é 8 4 Box 10: 'v x é 4 4 'd |
Reset box name |
Box 1: A p 'v 6 é ) 4 5 Box 2: 'v G é ; 4 'v J 5 Box 3: é [ 4 'v x é ( 4 Box 4: H 'v z é : 4 h 'd |
In-depth explanation of the setup
Effect of the Coin Case
The effects of the Coin Case are described in more detail on the following wiki page. Relevant to this setup is that the setup will redirect execution to address $FA98 (echo ram copy of $DA98), which is in the middle of party pokémon #3's stat experience data. During this redirection, the stack pointer gets incremented once and an address gets popped from the stack. The global effect is that the stack pointer is decremented once compared to when the Coin Case was used.
Effect of party pokémon #3
Defeating the provided list of pokémon will result in the following values at the following addresses, assuming the pokémon is in party slot #3:
DA95 00 nop DA96 75 ld [hl], l DA97 00 nop DA98 94 sub a, h DA99 00 nop DA9A C3 DA9B 00 DA9C CF jp $CF00 DA9D 00 nop DA9E 6E ld l, [hl]
Executing Coin Case at the location described in the setup will cause execution to jump to $DA98. It will then harmlessly slide through the sub a, h and nop instructions, after which execution will jump to $CF00, which is in the middle of the last buffered mail.
Effect of the mail
The last read mail is buffered from $CEED onward. Converting the characters from the mail to assembly results in the following:
80 add a, b 80 add a, b 80 add a, b 80 add a, b 80 add a, b 80 add a, b 80 add a, b 80 add a, b 80 add a, b 80 add a, b 80 add a, b 80 add a, b 80 add a, b 80 add a, b 80 add a, b 80 add a, b 4E ld c, (hl) ; Newline control character. 80 add a, b 80 add a, b AF xor a ; Located at $CF00, all values before this address are filler and will not be executed. D6 FD sub $FD ; Set a to $03. E0 9F ld (hRomBank), a; Set current ROM bank to bank 3. This ROM bank contains item and pack data and ensures safe return. E8 FF add sp, $FF ; $FF is interpreted as a singed integer, stack pointer gets decremented and the stack is now properly aligned again. D1 pop de D1 pop de D1 pop de ; Pop text command related addresses so that returning from ACE execution will resume normal game operation. AF xor a ; Set a to $00, set carry flag to 0. D2 B9 F8 jp nc, $F8B9 ; Jump to echo ram copy of $D8B9, which lies a few bytes before box data.
Effect of the test box name code
Box name data starts from $D8BF onward. Converting the provided mail code to assembly results in the following:
F6 FF or $FF ; Set a to $FF, set carry flag to 0. EA 80 F5 ld (F580), a ; $F580 is an echo ram copy of $D580, which corresponds to TM03's quantity. D0 ret nc ; Thanks to the preparatory work done by the mail, allow safe return to normal game operation.
Effect of the setup box name code
Converting the characters from box names to assembly results in the following code. Please note that the box name code overwrites part of itself, the translated assembly assumes the code was already used once.
The code overwrites part of itself to call the byteFill function. This will fill the area between $D57E and $D5AF with $FF values, setting all 50 TM quantities to 255.
Separately, this code overwrites the latter half of party pokémon #5's stat experience data, allowing it to function as a TM25 bootstrap that redirects execution to the Mail Writer.
Lastly, the value of the first item ID in the main item pocket is overwritten so that it becomes a TM25.
Box 1: $D8BF 80 add a, b AF xor a ; a = $00 EA F9 F8 ld ($F8F9), a D6 FF sub $FF ; a = $01 FB ei 50 ld d, b Box 2: $D8C8 EA F7 F8 ld ($F8F7), a D6 D0 sub $D0 ; a = $31 EA FC F8 ld ($F8FC), a 50 ld d; b Box 3: $D8D1 E6 A1 and $A1 ; a = $21 EA F4 F8 ld ($F8F4), a D6 EF sub $EF ; a = $32 FB ei 50 ld d, b Box 4: D8DA EA F8 F8 ld ($F8F8), a D6 E6 sub $E6 ; a = $4C EA FB F8 ld ($F8FB), a 50 ld d, b Box 5: $D8E3 E6 84 and $84 ; a = $04 EA FB FA ld ($FAFB), a D6 86 sub $86 ; a = $7E FB ei 50 ld d, b Box 6: $D8EC EA F5 F8 ld ($F8F5), a EA FD FA ld ($FAFD), a F6 FF or $FF ; a = $FF, reset carry flag 21 Box 7: $D8F5 7E F5 ld hl, wTMsHMs 01 32 00 ld bc, $0032 D4 4C 31 call nc, byteFill 50 ld d, b Box 8: $D907 E6 D2 and $D2 ; a = $D2 EA FC FA ld ($FAFC), a D6 FA sub $FA ; a = $D8, TM25's item ID FB ei 50 ld d, b Box 9: $D910 EA B8 F5 ld (wItems), a ; Main item pocket, first item ID D6 E3 sub $E3 ; a = $F5 EA FE FA ld ($FAFE), a 50 ld d, b Box 10: $D919 D6 B7 sub $B7 ; a = 3E, reset carry flag EA FA FA ld ($FAFA), a D0 ret nc 50 ld d, b Party pokémon #5's stat experience, starting from $DAFA 3E 04 ld a, $04 D2 7E F5 jp nc, wTMsHMS ; Carry and zero flag are both reset when using TM25
Effect of the TM code
Converting the TM quantities to assembly results in the following code. Please note that this code requires a value of $04 in register a in order to properly work.
11 55 DD ld de, $DD55 D5 push de D5 push de ; .nextMail D5 push de 21 42 62 ld hl, _ComposeMailMessage CF rst08h, FarCall a:hl E1 pop hl D1 pop de 2A ldi a, (hl) ; .continue FE 50 cp $50 38 FB jr c, .continue 28 0A jr z, .terminator 87 add a, a 86 add a, (hl) 12 ld (de), a 13 inc de 23 inc hl 81 add a, c 4F ld c, a 12 ld (de), a 18 EF jr .continue 21 01 C4 ld hl, $C401 ; .screenLoop 4D ld c, l CD EF 3A call PrintBCDNumber.loop - 1 1B dec de ; .goBack CD 90 37 call JoyTextDelay_ForcehJoyDown BD cp a, l ; l = $04 28 D9 jr z, .nextMail 38 F0 jr c, .displayLoop FE 08 cp $08 C8 ret z 18 F2 jr .goBack
Effect of the reset box name code
Converting the characters from box names to assembly results in the following code. This code overwrites the latter half of party pokémon #3's stat experience data, allowing it to function as a TM25 bootstrap that redirects execution to the Mail Writer.
Box 1: $D8BF 80 add a, b AF xor a ; a = $00 D6 FC sub $FC ; a = $04 EA 9B FA ld ($FA9B), a FB ei 50 ld d, b Box 2: $D8C8 D6 86 sub $86 ; a = $7E EA 9D FA ld ($FA9B), a D6 89 sub $89 ; a = $F5 FB ei 50 ld d; b Box 3: $D8D1 EA 9E FA ld ($FA9E), a D6 B7 sub $D7 ; a = $3E EA 9A FA ld ($FA9A), a 50 ld d, b Box 4: D8DA 87 add a, a D6 B9 sub $B9 ; a = $C3 EA 9C FA ld ($FA9C), a A7 and a ; Reset carry flag D0 ret nc 50 ld d, b Party pokémon #3's stat experience, starting from $DA9A 3E 04 ld a, $04 C3 7E F5 jp wTMsHMs ; Carry and zero flag are both reset when using TM25